PG-RMBH12-BP
Base product: PIM-GUARD-CABLE-SUPPORTS
PIM-Guard® Round Member Cable Support Bracket for Block Hangers (pkg of 10)- Two 3/8" threaded rods for up to 12 hangers. Install with torque wrench set at 10 to 15 ft-lb to meet carrier PIM requirements.
Specifications
Product classification
| Product Type | Antenna/RRU Cable Support |
| Product Brand | PIM-Guard® |
| Ordering Note | ANDREW® standard product (Global) |
| Warranty | One year |
General specifications
| Cable Runs, quantity | 12 |
| Mounting | Pipe, 60.3–88.9 mm (2-3/8 in to 3-1/2 in) OD |
Dimensions
| Height | 38.1 mm | 1.5 in |
| Width | 139.7 mm | 5.5 in |
| Length | 304.8 mm | 12 in |
| Mounting Diameter, maximum | 60.96 mm | 2.4 in |
| Mounting Diameter, minimum | 88.9 mm | 3.5 in |
Material specifications
| Material Type | Hot dip galvanized steel |
Packaging and weights
| Included | Attachment hardware | Clamps | Threaded rod |
| Packaging quantity | 10 |
| Weight, net | 2.6 kg | 5.732 lb |
Regulatory compliance/certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Product classification
| Product Type | Antenna/RRU Cable Support |
| Product Brand | PIM-Guard® |
| Ordering Note | ANDREW® standard product (Global) |
| Warranty | One year |
General specifications
| Cable Runs, quantity | 12 |
| Mounting | Pipe, 60.3–88.9 mm (2-3/8 in to 3-1/2 in) OD |
Dimensions
| Height | 38.1 mm | 1.5 in |
| Width | 139.7 mm | 5.5 in |
| Length | 304.8 mm | 12 in |
| Mounting Diameter, maximum | 60.96 mm | 2.4 in |
| Mounting Diameter, minimum | 88.9 mm | 3.5 in |
Material specifications
| Material Type | Hot dip galvanized steel |
Packaging and weights
| Included | Attachment hardware | Clamps | Threaded rod |
| Packaging quantity | 10 |
| Weight, net | 2.6 kg | 5.732 lb |
Regulatory compliance/certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & downloads