NNH4-65C-R6
12-port sector antenna, 4x 698–896 and 8x 1695–2360 MHz, 65° HPBW, 6x RET.
Features and benefits
- Features broadband Low Band (698-896 MHz) and High Band (1695-2360 MHz) arrays for 4T4R (4X MIMO) capability for Band 14, AWS, PCS and WCS applications
- Independent tilt for all arrays
- Array configuration provides capability for 4T4R (4x MIMO) on Low band and Dual 4T4R (4x MIMO) on High band
- Optimized SPR performance across all operating bands
- Excellent wind loading characteristics
- The antenna is supplied with mounting kits that provide 0 degree of mechanical downtilt; optional downtilt mounting kits are available
Specifications
General specifications
| Antenna Type | Sector |
| Band | Multiband |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 12 |
Remote electrical tilt (ret) information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (4) | Low band (2) |
| Power Consumption, idle state, maximum | 1 W |
| Power Consumption, normal conditions, maximum | 8 W |
| Protocol | 3GPP/AISG 2.0 (Multi-RET) |
Dimensions
| Width | 498 mm | 19.606 in |
| Depth | 197 mm | 7.756 in |
| Length | 2438 mm | 95.984 in |
| Net Weight, without mounting kit | 39.9 kg | 87.964 lb |
Array layout
| Click on image to enlarge. |
Port configuration
| Click on image to enlarge. |
Electrical specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 1695 – 2360 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical specifications
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain, dBi | 15.7 | 16.1 | 17.0 | 17.5 | 17.7 | 17.8 |
| Beamwidth, Horizontal, degrees | 75 | 73 | 58 | 59 | 61 | 59 |
| Beamwidth, Vertical, degrees | 9.7 | 8.6 | 7.9 | 7.4 | 7 | 6.3 |
| Beam Tilt, degrees | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 19 | 19 | 17 | 18 | 20 | 18 |
| Front-to-Back Ratio at 180°, dB | 32 | 33 | 39 | 42 | 39 | 40 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 300 | 300 | 250 | 250 | 250 | 200 |
Electrical specifications, basta
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 15.2 | 15.9 | 16.5 | 17.1 | 17.2 | 17.3 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.4 | ±0.8 | ±0.6 | ±0.6 | ±0.7 |
| Gain by Beam Tilt, average, dBi | 2 ° | 15.2 7 ° | 15.3 12 ° | 15.1 |
2 ° | 15.8 7 ° | 16.0 12 ° | 15.7 |
2 ° | 16.6 7 ° | 16.8 12 ° | 16.2 |
2 ° | 17.1 7 ° | 17.4 12 ° | 16.7 |
2 ° | 17.1 7 ° | 17.6 12 ° | 16.9 |
2 ° | 17.1 7 ° | 17.6 12 ° | 16.9 |
| Beamwidth, Horizontal Tolerance, degrees | ±2.4 | ±2.1 | ±4.8 | ±2.4 | ±3.2 | ±3.8 |
| Beamwidth, Vertical Tolerance, degrees | ±0.8 | ±0.5 | ±0.4 | ±0.3 | ±0.5 | ±0.3 |
| USLS, beampeak to 20° above beampeak, dB | 16 | 17 | 14 | 15 | 16 | 16 |
| Front-to-Back Total Power at 180° ± 30°, dB | 23 | 22 | 31 | 33 | 29 | 27 |
| CPR at Boresight, dB | 22 | 24 | 20 | 21 | 21 | 20 |
| CPR at Sector, dB | 9 | 6 | 9 | 9 | 8 | 8 |
Mechanical specifications
| Effective Projective Area (EPA), frontal | 0.9 m² | 9.688 ft² |
| Effective Projective Area (EPA), lateral | 0.31 m² | 3.337 ft² |
| Mechanical Tilt Range | 0°–10° |
| Wind Loading @ Velocity, frontal | 954.0 N @ 150 km/h (214.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 331.0 N @ 150 km/h (74.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 1,235.0 N @ 150 km/h (277.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 785.0 N @ 150 km/h (176.5 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and weights
| Width, packed | 565 mm | 22.244 in |
| Depth, packed | 309 mm | 12.165 in |
| Length, packed | 2625 mm | 103.347 in |
| Weight, gross | 52.6 kg | 115.963 lb |
Regulatory compliance/certifications
| Agency | Classification |
CHINA-ROHS
|
Above maximum concentration value |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
| UK-ROHS | Compliant/Exempted |
General specifications
| Antenna Type | Sector |
| Band | Multiband |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 12 |
Remote electrical tilt (ret) information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (4) | Low band (2) |
| Power Consumption, idle state, maximum | 1 W |
| Power Consumption, normal conditions, maximum | 8 W |
| Protocol | 3GPP/AISG 2.0 (Multi-RET) |
Dimensions
| Width | 498 mm | 19.606 in |
| Depth | 197 mm | 7.756 in |
| Length | 2438 mm | 95.984 in |
| Net Weight, without mounting kit | 39.9 kg | 87.964 lb |
Electrical specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 1695 – 2360 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical specifications
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain, dBi | 15.7 | 16.1 | 17.0 | 17.5 | 17.7 | 17.8 |
| Beamwidth, Horizontal, degrees | 75 | 73 | 58 | 59 | 61 | 59 |
| Beamwidth, Vertical, degrees | 9.7 | 8.6 | 7.9 | 7.4 | 7 | 6.3 |
| Beam Tilt, degrees | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 19 | 19 | 17 | 18 | 20 | 18 |
| Front-to-Back Ratio at 180°, dB | 32 | 33 | 39 | 42 | 39 | 40 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 25 | 25 | 25 | 25 | 25 | 25 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 300 | 300 | 250 | 250 | 250 | 200 |
Electrical specifications, basta
| Frequency Band, MHz | 698–806 | 806–896 | 1695–1880 | 1850–1990 | 1920–2180 | 2300–2360 |
| Gain by all Beam Tilts, average, dBi | 15.2 | 15.9 | 16.5 | 17.1 | 17.2 | 17.3 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.4 | ±0.8 | ±0.6 | ±0.6 | ±0.7 |
| Gain by Beam Tilt, average, dBi | 2 ° | 15.2; 7 ° | 15.3;12 ° | 15.1 | 2 ° | 15.8; 7 ° | 16.0;12 ° | 15.7 | 2 ° | 16.6; 7 ° | 16.8;12 ° | 16.2 | 2 ° | 17.1; 7 ° | 17.4;12 ° | 16.7 | 2 ° | 17.1; 7 ° | 17.6;12 ° | 16.9 | 2 ° | 17.1; 7 ° | 17.6;12 ° | 16.9 |
| Beamwidth, Horizontal Tolerance, degrees | ±2.4 | ±2.1 | ±4.8 | ±2.4 | ±3.2 | ±3.8 |
| Beamwidth, Vertical Tolerance, degrees | ±0.8 | ±0.5 | ±0.4 | ±0.3 | ±0.5 | ±0.3 |
| USLS, beampeak to 20° above beampeak, dB | 16 | 17 | 14 | 15 | 16 | 16 |
| Front-to-Back Total Power at 180° ± 30°, dB | 23 | 22 | 31 | 33 | 29 | 27 |
| CPR at Boresight, dB | 22 | 24 | 20 | 21 | 21 | 20 |
| CPR at Sector, dB | 9 | 6 | 9 | 9 | 8 | 8 |
Mechanical specifications
| Effective Projective Area (EPA), frontal | 0.9 m² | 9.688 ft² |
| Effective Projective Area (EPA), lateral | 0.31 m² | 3.337 ft² |
| Mechanical Tilt Range | 0°–10° |
| Wind Loading @ Velocity, frontal | 954.0 N @ 150 km/h (214.5 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 331.0 N @ 150 km/h (74.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 1,235.0 N @ 150 km/h (277.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 785.0 N @ 150 km/h (176.5 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and weights
| Width, packed | 565 mm | 22.244 in |
| Depth, packed | 309 mm | 12.165 in |
| Length, packed | 2625 mm | 103.347 in |
| Weight, gross | 52.6 kg | 115.963 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory compliance/certifications
| Agency | Classification |
|
CHINA-ROHS
|
Above maximum concentration value |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
| UK-ROHS | Compliant/Exempted |
Installation & videos
Installation instruction
Documentation & downloads
Assembly drawing
Product information
Product specification
Assembly drawing
Product compliance documentation
Product information
Product specification
Related products & accessories
