MBLLHHH-65C-A5M
10-port sector antenna, 4x 824–960 and 6x 1710–2180 MHz, 65° HPBW, 5x attached RETs
Features and benefits
- Excellent solution for multi-operator site sharing applications
- Rugged and reliable design to enhance network quality
- Optimal choice for tough zoning and hard-to-build sites
- MIMO ready
Specifications
General specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 6 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 10 |
Remote electrical tilt (ret) information
| Model with Factory Installed AISG 2.0 Actuator | MBLLHHH-65C-A5M |
Dimensions
| Width | 549 mm | 21.614 in |
| Depth | 165 mm | 6.496 in |
| Length | 2569 mm | 101.142 in |
| Net Weight, without mounting kit | 43.9 kg | 96.783 lb |
Electrical specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 824 – 960 MHz | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical specifications
| Frequency Band, MHz | 824–896 | 870–960 | 1710–1880 | 1850–1990 | 1920–2180 |
| Gain, dBi | 16.6 | 17.3 | 17.3 | 17.1 | 16.6 |
| Beamwidth, Horizontal, degrees | 70 | 67 | 61 | 60 | 58 |
| Beamwidth, Vertical, degrees | 7.7 | 7.4 | 7.3 | 7 | 6.5 |
| Beam Tilt, degrees | 0–8 | 0–8 | 2–10 | 2–10 | 2–10 |
| USLS, typical, dB | 15 | 15 | 15 | 15 | 15 |
| Front-to-Back Ratio at 180°, dB | 26 | 28 | 27 | 27 | 27 |
| CPR at Boresight, dB | 20 | 17 | 19 | 17 | 15 |
| CPR at Sector, dB | 11 | 9 | 9 | 9 | 8 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 | 30 | 30 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 | 350 | 350 |
Mechanical specifications
| Wind Loading @ Velocity, frontal | 1,744.0 N @ 150 km/h (392.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 418.0 N @ 150 km/h (94.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 1,988.0 N @ 150 km/h (446.9 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and weights
| Width, packed | 712 mm | 28.032 in |
| Depth, packed | 331 mm | 13.032 in |
| Length, packed | 2965 mm | 116.732 in |
| Weight, gross | 72.4 kg | 159.614 lb |
General specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 6 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 10 |
Remote electrical tilt (ret) information
| Model with Factory Installed AISG 2.0 Actuator | MBLLHHH-65C-A5M |
Dimensions
| Width | 549 mm | 21.614 in |
| Depth | 165 mm | 6.496 in |
| Length | 2569 mm | 101.142 in |
| Net Weight, without mounting kit | 43.9 kg | 96.783 lb |
Electrical specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 824 – 960 MHz | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical specifications
| Frequency Band, MHz | 824–896 | 870–960 | 1710–1880 | 1850–1990 | 1920–2180 |
| Gain, dBi | 16.6 | 17.3 | 17.3 | 17.1 | 16.6 |
| Beamwidth, Horizontal, degrees | 70 | 67 | 61 | 60 | 58 |
| Beamwidth, Vertical, degrees | 7.7 | 7.4 | 7.3 | 7 | 6.5 |
| Beam Tilt, degrees | 0–8 | 0–8 | 2–10 | 2–10 | 2–10 |
| USLS, typical, dB | 15 | 15 | 15 | 15 | 15 |
| Front-to-Back Ratio at 180°, dB | 26 | 28 | 27 | 27 | 27 |
| CPR at Boresight, dB | 20 | 17 | 19 | 17 | 15 |
| CPR at Sector, dB | 11 | 9 | 9 | 9 | 8 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 | 30 | 30 |
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 | 350 | 350 |
Mechanical specifications
| Wind Loading @ Velocity, frontal | 1,744.0 N @ 150 km/h (392.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 418.0 N @ 150 km/h (94.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 1,988.0 N @ 150 km/h (446.9 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and weights
| Width, packed | 712 mm | 28.032 in |
| Depth, packed | 331 mm | 13.032 in |
| Length, packed | 2965 mm | 116.732 in |
| Weight, gross | 72.4 kg | 159.614 lb |
Installation & videos
Documentation & downloads
Assembly drawing
Product information
Product specification
Assembly drawing
Product compliance documentation
Product information
Product specification
Related products & accessories
Included products
Base station antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related products
Base station antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol
Included products
Base station antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related products
Base station antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol