HBXXX-6516DS-VTM | HBXXX-6516DS-A3M
6-port sector antenna, 6x 1710–2180 MHz, 65° HPBW, RET compatible
Features and benefits
- Excellent solution for site sharing and maximizing capacity
- Excellent front-to-back ratio, USLS, VSWR, and PIM specifications to enhance network quality
- Ideal solution for dense urban, suburban site applications
- Each antenna downtilt can be independently adjusted for greater flexibility in network optimization
Specifications
General specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 6 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 0 |
| RF Connector Quantity, total | 6 |
Remote electrical tilt (ret) information
| Model with Factory Installed AISG 2.0 Actuator | HBXXX-6516DS-A3M |
Dimensions
| Width | 500 mm | 19.685 in |
| Depth | 90 mm | 3.543 in |
| Length | 1309 mm | 51.535 in |
| Net Weight, without mounting kit | 15.3 kg | 33.731 lb |
Electrical specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical specifications
| Frequency Band, MHz | 1710–1880 | 1850–1990 | 1920–2180 |
| Gain, dBi | 17.9 | 17.7 | 17.8 |
| Beamwidth, Horizontal, degrees | 64 | 63 | 62 |
| Beamwidth, Vertical, degrees | 7.8 | 7.4 | 7 |
| Beam Tilt, degrees | 2–10 | 2–10 | 2–10 |
| USLS (First Lobe), dB | 17 | 17 | 17 |
| Front-to-Back Ratio at 180°, dB | 32 | 35 | 35 |
| CPR at Boresight, dB | 27 | 28 | 26 |
| CPR at Sector, dB | 7 | 7 | 6 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.4 | 15.6 | 1.4 | 15.6 | 1.4 | 15.6 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 300 | 300 | 300 |
Mechanical specifications
| Wind Loading @ Velocity, frontal | 802.0 N @ 150 km/h (180.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 111.0 N @ 150 km/h (25.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 860.0 N @ 150 km/h (193.3 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and weights
| Width, packed | 663 mm | 26.102 in |
| Depth, packed | 278 mm | 10.945 in |
| Length, packed | 1782 mm | 70.158 in |
| Weight, gross | 18.6 kg | 41.006 lb |
Regulatory compliance/certifications
| Agency | Classification |
CE
|
Compliant with the relevant CE product directives |
CHINA-ROHS
|
Below maximum concentration value |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
| UK-ROHS | Compliant |
| REACH-SVHC | Compliant as per SVHC revision on www.andrew.com/ProductCompliance |
General specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 6 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 0 |
| RF Connector Quantity, total | 6 |
Remote electrical tilt (ret) information
| Model with Factory Installed AISG 2.0 Actuator | HBXXX-6516DS-A3M |
Dimensions
| Width | 500 mm | 19.685 in |
| Depth | 90 mm | 3.543 in |
| Length | 1309 mm | 51.535 in |
| Net Weight, without mounting kit | 15.3 kg | 33.731 lb |
Electrical specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical specifications
| Frequency Band, MHz | 1710–1880 | 1850–1990 | 1920–2180 |
| Gain, dBi | 17.9 | 17.7 | 17.8 |
| Beamwidth, Horizontal, degrees | 64 | 63 | 62 |
| Beamwidth, Vertical, degrees | 7.8 | 7.4 | 7 |
| Beam Tilt, degrees | 2–10 | 2–10 | 2–10 |
| USLS (First Lobe), dB | 17 | 17 | 17 |
| Front-to-Back Ratio at 180°, dB | 32 | 35 | 35 |
| CPR at Boresight, dB | 27 | 28 | 26 |
| CPR at Sector, dB | 7 | 7 | 6 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.4 | 15.6 | 1.4 | 15.6 | 1.4 | 15.6 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 300 | 300 | 300 |
Mechanical specifications
| Wind Loading @ Velocity, frontal | 802.0 N @ 150 km/h (180.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 111.0 N @ 150 km/h (25.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 860.0 N @ 150 km/h (193.3 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and weights
| Width, packed | 663 mm | 26.102 in |
| Depth, packed | 278 mm | 10.945 in |
| Length, packed | 1782 mm | 70.158 in |
| Weight, gross | 18.6 kg | 41.006 lb |
Regulatory compliance/certifications
| Agency | Classification |
|
CE
|
Compliant with the relevant CE product directives |
|
CHINA-ROHS
|
Below maximum concentration value |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
| UK-ROHS | Compliant |
| REACH-SVHC | Compliant as per SVHC revision on www.andrew.com/ProductCompliance |
Installation & videos
Documentation & downloads
Assembly drawing
Product information
Product specification
Assembly drawing
Product compliance documentation
Product information
Product specification
Related products & accessories
Included products
Base station antennas
-
![]()
600899A-2 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related products
Base station antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol
Included products
Base station antennas
-
![]()
600899A-2 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related products
Base station antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol